ID230 NIR Best Dark Count Rate

ID230 FREE RUNNING SINGLE PHOTON DETECTOR - NEAR INFRARED RANGE (900 - 1700NM)

  • InGaAs/InP APD
  • 900-1700nm
  • Free-Running
  • Best dark count rate (<50Hz)
  • 200ps Timing Resolution
  • Single mode or multimode fiber connection

Applications

  • Quantum Optics
  • Quantum Cryptography
  • Singlet Oxygen
  • Fiber Optics Measurement
  • Spectroscopy, Raman
  • Eye Safe Lidar
  • Fluorescence Lifetime
  • Photoluminescence
  • IC Failure Analysis

Description

Specially for the applications which require asynchronous photon detection, IDQ has developed and offers a new series of single photon detectors operating in free-running mode. We propose our customers an infrared single-photon counter ID230 – a photon detector with the best-in-class dark count rate, free-running mode at telecom wavelengths and adjustable quantum efficiency up to 25%.

This unique for single photon detection product based on InGaAs/InP avalanche photodiode working in Geiger mode provides fast avalanche quenching. That limits afterpulsing and allows you to run operations at reasonably short deadtimes which can be set between 2us and 100us. In addition, a new cooling system enabling to go down up to – 100 °C gives the infrared single photon detector ID230 the lowest dark count rate available at the market.

Low afterpulsing and dark count rate are combined with the best timing jitter and the highest quantum efficiency. The photon counting module can operate at detection probability levels of up to 25%. The photon arrival time is reflected by a 100ns LVTTL pulse what makes ease of combination of a photon detector with other electronic devices within your research.

Furthermore, the infrared single-photon counter ID230 has a simple USB interface allowing its users to set the efficiency, the temperature of the avalanche photodiode and the deadtime. Therefore, the features of the single-photon detector ID230 can be efficiently used in a number of applications such as Quantum Optics & Quantum Cryptography, Fiber Optics Measurement and other.

Features

  • Adjustable detection probability  from 0 to 25%
  • Adjustable deadtime from 2us to 100us
  • Adjustable temperature from -50°C to -100°C
  • TTL Output (100ns, SMA connector)
  • Remote control via USB
Share on LinkedInTweet about this on TwitterShare on Google+Share on FacebookEmail this to someone